Description
Product Specification: Marine Engine PCM 5.8 260 HP
General Information
- Manufacturer: Pleasurecraft Marine Engines (PCM)
- Model: 5.8 HO (High Output)
- Power Output: 260 Horsepower (HP)
- Engine Type: 4-Stroke V8, Marine Gasoline Engine
Engine Specifications
- Displacement: 5.8 Liters (351 cubic inches)
- Configuration: V8
- Bore and Stroke: 4.00" x 3.50"
- Compression Ratio: 9.0:1
- Cooling System: Freshwater (Closed) Cooling or Raw Water Cooling, based on configuration
- Ignition System: Electronic
- Fuel System: Multi-Port Fuel Injection (MPI)
- Fuel Type: Unleaded Gasoline
- Maximum RPM Range: 4,400 - 4,800 RPM
Dimensions and Weight
- Length: 36 inches (91.44 cm)
- Width: 28 inches (71.12 cm)
- Height: 22 inches (55.88 cm)
- Weight: Approximately 950 lbs (430 kg)
Performance & Efficiency
- Full Throttle Operating RPM: 4,400 - 4,800 RPM
- Idle Speed Range: 600 - 800 RPM
- Fuel Consumption at Full Throttle: Approx. 20-25 GPH (gallons per hour)
Electrical System
- Alternator: 70 Amps
- Battery Requirement: 12V Marine Battery
Exhaust System
- Exhaust Manifolds: Cast Iron with Water Cooling
Lubrication System
- Oil Type: SAE 15W-40 Marine Grade Oil
- Oil Capacity: 6 Quarts (5.68 Liters)
Mounting Information
- Engine Mount Type: Adjustable Rear and Front Mounts
- Mounting Angle: 15°
- Standard Rotation: Right-hand (Clockwise)
Compliance & Standards
- EPA (Environmental Protection Agency): Compliant
- CARB (California Air Resources Board): 3-Star Ultra-Low Emission Marine Engine
- ABYC (American Boat and Yacht Council): Compliant
Additional Features
- Engine Management System: PCM's proprietary engine control module (ECM) with diagnostic capabilities
- Gearbox Compatibility: Compatible with PCM, Borg Warner, and ZF Marine Transmissions
- Warranty: 2-Year Limited Warranty
Usage & Applications
Ideal for a variety of marine vessels including:
- Recreational Boats
- Ski Boats
- Fishing Boats
- Cruisers
Optional Accessories
- Remote Oil Filter Kit
- Closed Cooling Kit
- Dual Battery Isolator
- Stainless Steel Exhaust Tails
Maintenance & Service Intervals
- Oil and Filter Change: Every 50 hours or annually, whichever comes first
- Spark Plugs: Inspect and replace every 100 hours
- Coolant: Inspect levels regularly; replace every 300 hours or annually for closed systems
Contact Information
- Customer Service: 1-800-xxx-xxxx
- Website: www.pcmengines.com
- Email: support@pcmengines.com
Note:
Specifications are subject to change without notice. Please consult the manufacturer or your dealer for the most current information.
