Maritime Propulsion Marine engines, propulsors, electrification and drivetrain news

LISTER LPA2

Model
LPA2
Type
Engine
Application
Commercial, Recreational

Description

Certainly! Below is a detailed product specification listing for the Lister LPA2 marine engine.


Marine Engine Specification: Lister LPA2

General Information:

  • Manufacturer: Lister Petter
  • Model: LPA2
  • Engine Type: Two-Cylinder Marine Diesel Engine

Engine Specifications:

  • Engine Power Output: 13.1 kW (17.5 HP) @ 3600 RPM
  • Cylinders: 2
  • Bore x Stroke: 80 mm x 77 mm (3.15 in x 3.03 in)
  • Displacement: 0.774 liters (774 cc)
  • Compression Ratio: 19:1
  • Cooling System: Water-cooled (heat exchanger or keel cooling optional)

Performance:

  • Engine Speed Range: 800 RPM to 3600 RPM
  • Fuel Consumption: 246 g/kWh (approx. 0.405 lbs/HP/hr)
  • Fuel Type: Diesel

Dimensions and Weight:

  • Length: 850 mm (33.5 in)
  • Width: 540 mm (21.3 in)
  • Height: 650 mm (25.6 in)
  • Dry Weight: 167 kg (368 lbs)

Features:

  • Starting System: Electric start
  • Alternator: 12V, 40A
  • Lubrication System: Wet sump with full-flow spin-on oil filter
  • Air Intake System: Naturally aspirated
  • Exhaust System: Water-cooled exhaust manifold

Mounting and Installation:

  • Engine Mounts: Resilient mounts provided as standard
  • Flywheel: SAE J620 size 6.5
  • Flywheel Housing: SAE 5 configuration

Operational Capabilities:

  • Angle of Operation: Capable of operation at up to 25 degrees in all directions (intermittent operation at higher angles may be permissible)
  • Environmental Compliance: Meets current emission regulations for marine diesel engines

Optional Accessories:

  • Control Panels: Basic to comprehensive panels with various monitoring options
  • Gearbox Options: Mechanical or hydraulic gearboxes available
  • Exhaust Elbow: Wet or dry configurations
  • Additional Fuel Filters: Primary fuel filters (Racor or similar)

Maintenance and Service:

  • Service Intervals: Recommended service every 250 hours of operation
  • Accessibility: Designed for easy access to service points to facilitate maintenance

Warranty:

  • Warranty Period: Standard 2-year warranty (conditions apply)

Ensure to verify all specifications with the manufacturer or an authorized dealer as these can vary slightly based on specific model configurations or updates.

Specifications

Power 15 HP (11.19 kW)
Cylinders Arrangement/Number 2
Displacement 726 cm3 (0.73 L, 44.3 in3)
Rated Speed 3,000 r/min
Weightlb 319 lb (144.7 kg)