Description
Product Specification Listing: Universal Marine Engine M-25XPA (23.1 HP)
Overview
The Universal M-25XPA is an advanced marine diesel engine designed for sailboats, yachts, and small commercial vessels. Engineered for high performance, fuel efficiency, and reliability, the M-25XPA provides the power and robustness needed for demanding marine environments.
General Specifications
- Model: Universal M-25XPA
- Type: Marine Diesel Engine
- Horsepower: 23.1 HP (17.2 kW) @ 3200 RPM
- Displacement: Approximately 0.949 liters (58 cubic inches)
- Cylinders: 3
- Bore x Stroke: 74 mm x 70 mm (2.91 in x 2.76 in)
- Aspiration: Naturally Aspirated
- Cooling System: Freshwater Cooled, Heat Exchanger
- Weight: Approx. 240 lbs (109 kg)
Performance
- Rated RPM: 3200 RPM
- Idle RPM: Approximately 800-900 RPM
- Fuel Consumption: Approx. 0.6 gallons per hour at cruising speed
- Max Torque: Approx. 57 Nm (42 ft-lbs)
- Governor Type: Mechanical
Dimensions
- Length: 673 mm (26.5 inches)
- Width: 513 mm (20.2 inches)
- Height: 559 mm (22 inches)
Fuel System
- Fuel Type: Diesel
- Injection System: Indirect Injection
- Fuel Pump: Mechanical Fuel Pump
- Fuel Filter: Replaceable Spin-on Filter
Lubrication System
- Oil Capacity: Approx. 3.5 liters (3.7 US quarts)
- Oil Filter: Replaceable Spin-on Filter
- Lubrication Type: Forced Circulation with Gear Pump
Electrical System
- Voltage: 12 Volts DC
- Starter Motor: 12V, 1.4 kW
- Alternator: 12V, 60 Amps
- Glow Plugs: Provided for Cold Start Assistance
Exhaust System
- Exhaust Type: Wet Exhaust
- Exhaust Elbow: Included
- Muffler: Recommended (not included)
Cooling System
- Cooling Type: Heat Exchanger
- Closed Loop Freshwater System: Yes
- Raw Water Pump: Impeller Type
Transmission
- Type: Mechanical or Hydraulic (Optional)
- Propeller Shaft: Direct Drive
- Gear Ratios Available: 2:1, 2.5:1, 3:1 (depending on the model)
Optional Accessories
- Control Panel: Deluxe or Basic Control Panels Available
- Remote Oil Filter Kits
- Secondary Fuel Filtration Systems
- Engine Mounts and Vibration Isolators
Compliance and Standards
- Emission Standards: Meets US EPA Marine Standards (Tier 1)
- Certifications: ISO 9001, CE Certification (as applicable)
Warranty and Support
- Warranty: 2 Years Limited Warranty
- Service Network: Worldwide Authorized Service Centers
- Support: Technical Support Available via Dealer Network and Online Resources
Applications
- Ideal for: Sailboats, Yachts, and Small Commercial Vessels
- Configuration: Suitable for Retrofits and New Installations
Manufacturer Contact Information
- Manufacturer: Universal by Westerbeke
- Customer Service Phone: [Insert Phone Number]
- Website: [Insert Website URL]
- Email: [Insert Email Address]
For more detailed information, installation guidelines, and purchase inquiries, please contact your nearest Universal by Westerbeke dealer or visit our website.
Note: Specifications are subject to change without notice. Always refer to the official product documentation and user manual for the most accurate and detailed information.
