Description
Product Specification Listing: TOHATSU 60 HP 2-Stroke Marine Engine
General Information:
- Manufacturer: Tohatsu
- Model: M60C
- Type: 2-Stroke Outboard Motor
- Horsepower: 60 HP
Technical Specifications:
- Engine Type: 2-Stroke
- Cylinders: 3-cylinder
- Displacement: 849 cc (51.8 cu.in.)
- Bore x Stroke: 72 x 69.5 mm (2.83 x 2.74 in)
- Full Throttle RPM Range: 5,150–5,850 RPM
- Lubrication: Pre-Mixed or Oil Injection
- Fuel Type: Unleaded Gasoline (minimum 87 Octane)
- Oil Type: TC-W3 (for 2-stroke marine engines)
Fuel and Oil System:
- Fuel Tank Capacity: Dependent on the external fuel tank used, typically 25 liters (6.6 gallons)
- Fuel Delivery System: Carbureted with oil injection
Ignition System:
- Ignition Type: Capacitor Discharge Ignition (CDI) System
- Starting System: Manual or Electric Start
- Alternator Output: 12V, 149W (12 Amp)
Dimensions and Weight:
- Overall Length: 937 mm (36.9 in)
- Overall Width: 372 mm (14.6 in)
- Overall Height: Varies by shaft length (see below)
- Transom Height:
- Short Shaft: 508 mm (20 in)
- Long Shaft: 635 mm (25 in)
- Weight:
- Short Shaft (Manual Start): Approx. 43 kg (95 lbs)
- Long Shaft (Electric Start): Approx. 46 kg (101 lbs)
Performance:
- Gear Ratio: 2.08:1
- Gear Shift: Forward - Neutral - Reverse (F-N-R)
- Propeller Options: Various pitch options available to suit different boating needs
Additional Features:
- Steering System: Tiller Handle or Remote Steering
- Trim and Tilt: Manual Tilt or Power Trim and Tilt options available
- Engine Protection: Over-rev limiter, Overheat warning
- Corrosion Protection: Multi-layer paint process, sacrificial anodes
- Environmental Compliance: EPA and CARB approved for low emissions
Package Contents:
- Outboard Motor
- User Manual
- Tool Kit
- Emergency Stop Switch (Kill Switch) with Lanyard
- Fuel Tank and Fuel Line (if included by dealer)
- Mounting Hardware
Warranty:
- Standard Warranty: 3 Years Limited Warranty for recreational use
Recommended Accessories:
- External Fuel Tank (25-liter recommended)
- Fuel Line Assembly
- Fuel Stabilizer and Conditioner
- Spare Propeller
- Engine Cover
Safety and Maintenance:
- Ensure regular maintenance as per manufacturer guidelines.
- Always follow proper pre-mixing ratios if not equipped with oil injection.
- Use fresh, clean fuel and appropriate marine-grade engine oil.
Dealer and Service Information:
- Distributor: Authorized Tohatsu Marine Dealers and Service Centers
- Customer Support: Tohatsu provides customer support through their network of dealers and online resources.
Note: Specifications are subject to change by the manufacturer. Always verify details with the dealer or refer to the official Tohatsu documentation for the most accurate and updated information.
