CENTA
CENTAFLEX
Elastomer flexible couplings for engine-to-gearbox and auxiliary drives, covering about 0.01–24 kNm.
32 products
Shaft line components: stern tube seals, shaft bearings, flexible couplings and torsional dampers.
CENTA
Elastomer flexible couplings for engine-to-gearbox and auxiliary drives, covering about 0.01–24 kNm.
CENTA
Torsionally stiff drive shafts (about 3.3–150 kNm) and lightweight carbon-fibre shafts for marine drivelines.
Duramax Marine
Water-lubricated rubber-lined sleeve and flanged shaft bearings for struts and stern tubes, for shafts from 3/4 to 15 inches.
Duramax Marine
Composite water-lubricated stern tube bearings with solid lubricants; ABS type-approved for L/d ratios down to 2:1.
Geislinger
Robust torsionally elastic, high-damping steel-spring coupling for engine and propulsion drivetrains.
Geislinger
Tuned steel-spring torsional vibration damper with oil hydraulic damping, 0.2–5 m diameter; Vdamp viscous version.
Geislinger
Lightweight, maintenance-free fibre-composite shaftlines and couplings, including electrically insulating versions.
Geislinger
Lightweight, maintenance-free misalignment coupling with high acoustic attenuation; SILENCO Neo is an ultra-light version.
Geislinger
Monitoring systems and digital solutions for torsional vibrations and the condition of dampers and couplings.
Kemel
Oil-lubricated stern tube seals for merchant ships, including air-type (AX) and compact (CX/DX) versions.
Kemel
Stern tube seals for water-lubricated propeller shaft arrangements.
Kemel
Stern tube bushes, intermediate shaft bearings and water-lubricated bearings for propeller shafting.
SKF
Oil-lubricated Simplex stern tube seals for propeller shafts of merchant, cruise and naval ships.
SKF
Hydrodynamic shaft-line bearings and complete stern tube systems, including Simplex FlexiTube and BlueRun solutions.
SKF
SKF OK shaft and flange couplings for propeller shaft lines, plus retractable and non-retractable fin stabilisers.
Thordon Bearings
Open seawater-lubricated propeller shaft bearing system that eliminates stern tube oil; Lifetime Bearing Wearlife Guarantee.
Thordon Bearings
Polymer bearing grades for propeller shafts and rudders; SXL offers lower friction and higher abrasion resistance than XL.
Thordon Bearings
Mechanical face seals for water-lubricated shafts: TG100 for 86–305 mm shafts, SeaThigor for 300–750 mm shafts.
Thordon Bearings
Toughened two-part epoxy coating protecting propeller shafts from seawater corrosion in water-lubricated systems.
Tides Marine
Drip-free, self-aligning lip-type propeller shaft seals for 1–8 in (25–160 mm) shafts.
Tides Marine
Self-aligning rudder bearing and seal systems with ABS and Lloyd's approval, tolerating up to 10° misalignment.